Tower Bridge, London, England, UK
Tower Bridge, London, England, UK

Tower Bridge, London, England, UK

Introduction

Tower Bridge is a bascule bridge in London, England over the River Thames. It is close to the Tower of London, which gives it its name. It has become an iconic symbol of London it is sometimes mistakenly called London Bridge, which is actually the next bridge upstream. The bridge is owned and maintained by Bridge House Estates, a charitable trust overseen by the Corporation of London.

Facts & Figures

Carries Motor Vehicles and pedestrians
Crosses River Thames
Maintained by Bridge House Estates
Design Bascule Bridge
Total Length 244m (800 feet)
Opening Year 1894

Design

In the second half of the nineteenth century increased commercial development in the East End of London led to a requirement for a new river crossing downstream of London Bridge. A traditional fixed bridge could not be built because it would cut off access to the port facilities situated at the time in the Pool of London, between London Bridge and the Tower of London. A tunnel beneath the Thames, the Tower Subway, was opened in 1870, but it could accommodate pedestrian traffic.

A Special Bridge or Subway Committee was formed in 1876 to find a solution to the river crossing problem. It opened the design of the crossing to public competition. Over 50 designs were submitted, including one from civil engineer Sir Joseph Bazalgette. The Evaluation of the designs was surrounded by controversy, and it was not until 1884 that a design submitted by Horace Jones, the City Architect, was approved.

Jones” design was for a bascule bridge 800 feet (244m) in length with two towers each 213 feet (65m) high, built on piers. The central span of 200 feet (61m) between the towers is split into two equal bascules or leaves, which can be raised to an angle of 83 degrees to allow river traffic to pass. Although each bascule weighs over 1,000 tons, they are counterbalanced to minimise the force required and allow raising in one minute.

The original hydraulic raising mechanism was powered by pressurised water stored in six accumulators. Water was pumped into the accumulators by steam engines. Today the original hydraulic machinery still opens the bridge, however it has been converted to use oil instead of water and electric motors have taken the place of the steam engines and accumulators. The old mechanism is open to the public.

Construction

Construction of the bridge started in 1886 and took 8 years, employing 5 major contractors and 432 construction workers. Two massive piers, containing over 70,000 tons of concrete, were sunk into river bed to support the construction. Over 11,000 tons of steel provided the framework for the towers and walkways. This was then clad in Cornish granite and Portland stone, both to protect the underlying steelwork and to give the bridge a pleasing appearance.

Jones died in 1887, and his chief engineer, Sir John Wolfe-Barry, took over the project. Wolfe-Barry replaced Jones” original mediaeval style of facade with the more ornate Victorian gothic style that makes the bridge a distinctive landmark.

The bridge was opened on 30 June 1894 by the Prince of Wales, the future King Edward VII of the United Kingdom, and his wife, Alexandra of Denmark.

Tower Bridge Today

The high-level walkways between the towers gained an unpleasant reputation as a haunt for prostitutes and pickpockets and were closed in 1910. They are now been reopened as part of the Tower Bridge Experience, an exhibition mostly housed in the bridge’s twin towers. The exhibition also includes photos, holograms and film detailing the build, along with access to the original steam engines that once powered the bridge bascules, housed in a building close to the south end of the bridge.

A Behind the Scenes tour can be booked in advance, on which it is possible to see the bridge”s command centre where the raising of the bridge is controlled when a vessel passes underneath. The bascules of the bridge are raised around 900 times a years.

Although river traffic is now a fraction of what it used to be, it still takes priority over road traffic. This nearly caused a diplomatic incident in 1996, when the motorcade of United States President Bill Clinton got stuck on Tower Bridge while the bascules were unexpectedly opened.

Today, 24 hours’ notice is required before opening the bridge. A computer system was installed in 2000 to control the raising and lowering of the bascules remotely. Unfortunately this has proved less reliable than desired, resulting in the bridge being stuck in the open or closed positions on a number of occasions (most recently 2 June 2005).

Useful Links

Official Website